Interface Ethernet User-Priority; System Jumbo-Mtu-Limit - Avaya 2330 Reference Manual

Ethernet interface commands
Syntax
traffic-class-table user-priority <user priority> num-traffic-
classes <traffic classes> value <value>
Table 72: Variable definitions
<traffic classes>
<user priority>
<value>
Example
AG/configure/interface/ethernet (0/1)# traffic-class-table user-
priority 1 num-traffic-classes 3 value 3

interface ethernet user-priority

Use this command to configure the default user priority associated with a Layer 2 interface.
Syntax
user-priority <value>
Table 73: Variable definitions
<value>
Example
AG/configure/interface/ethernet (0/1)# user-priority 3

system jumbo-mtu-limit

The Advanced Gateway 2330 (AG2330) supports jumbo frames. Use this command to
configure the AG2330 system settings to support jumbo frames.
92 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Specifies the number of traffic classes
supported. Valid values are 1 to 8.
Specifies the user priority value. Valid values
are 0 to 7.
Specifies the value to be used for the given
user priority and number of traffic classes.
Value
Specifies the user priority value for the
interface. Valid values are 0 to 7.
August 2013