REP 27.5 TRAY 2 FEED SOLENOID
AND FEED CLUTCH
PARTS LIST ON PL 27.3
REMOVAL
WARNING
Switch the Main Power off and disconnect the
Power Cord.
1. Remove the Tray 2 Module (REP 27.1).
2. (Figure 1):
Remove the Tray 2 Feed
Solenoid.
3. Remove the Tray 2 Feed Clutch.
Feed
Solenoid
Figure 1. Removing the Tray 2 Feed Solenoid
and Feed Clutch
REPAIRS/ADJUSTMENTS
REP 27.5, 27.6
REPLACEMENT
NOTE: After assembling the components, hand
crank
the
feeder
Energize the Feed Solenoid several times by
hand and check that the Feed Solenoid engages
the Feed Clutch and stops the rollers in the " flat
down" position.
Feed
Clutch
F9
REP 27.6 TRAY 2 FEED ROLLERS
PARTS LIST ON PL 27.2
through
several
cycles.
REMOVAL
Switch the Main Power off and disconnect the
Power Cord.
1. Remove the Tray 2 Module (REP 27.1).
2. Remove the Tray 2 Feed Solenoid and Feed
3. (Figure 1): Remove the Tray 2 Feed Rollers.
Figure 1. Removing the Tray 2 Feed Rollers
2/99
4-54
WARNING
Clutch (REP 27.5).
Feed
Rollers
DocuPrint C55/C55mp/[NC60]
F5