Rep 1.8 Rear Cover Assembly - Xerox N2125N - DocuPrint B/W Laser Printer Service Manual

REP 1.8 Rear Cover Assembly

Parts List on PL 1.3
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Open the Rear Cover Assembly by squeezing the clips.
2. Lift the lead edge of the locking tab to release and remove the Stopper from the cover.
(Figure 1).
3. Slide the Pivot Stopper that secures the left Rear Cover Assembly
4. Slide the Rear Cover Assembly to the right (as viewed from the rear)
Figure 1 Stopper
Initial Issue
DocuPrint N2125
(Figure 2).
(Figure 2).
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-9
manuals4you.com manuals4you.com
Figure 2 Rear Cover
Repair-Adjustment
REP 1.8