Rep 12.41 Finisher Rear Upper Cover; Rep 12.42 Finisher Rear Lower Cover - Xerox Phaser 7760 Service Manual

REP 12.41 Finisher Rear Upper Cover

Parts List on PL 21.2
Removal
1. Remove the Horizontal Transport Connector Cover.
2. Disconnect the wiring harness J8444 (refer to Section 7, H-Transport Top View Plug/Jack
Locations - Figure 9).
3. Remove the 4 screws securing the Rear Upper Cover.
4. Lift the Cover up and slide it out (Figure
Figure 1 Removing Rear Upper Cover
Repairs and Adjustments
REP 12.41, REP 12.42
1).

REP 12.42 Finisher Rear Lower Cover

Parts List on PL 21.2
Removal
1. Remove the 4 screws securing the Finisher Rear Lower Cover.
2. Remove the Rear Lower Cover
Figure 1 Removing Rear Lower Cover
January 2010
4-66
(Figure 1).
Phaser 7760 Color Laser Printer
Revised