REP 8.1 Left Cover Assembly (Left-Hand Door A)
Parts List on
PL 2.8
Removal
1.
Remove the Rear Cover
(REP
14.2).
2.
Remove the Rear Left Middle Cover
3.
Remove Tray 1 (MPT)
(REP
7.1).
4.
Remove the Fuser Cover
(REP
14.8).
5.
Removing the Plastic Harness Cover
a.
Disconnect the 3 wiring harnesses.
b.
Remove 1 screw and the Plastic Harness Cover.
Figure 1 Removing Plastic Harness Cover
Revised
Phaser 7760 Color Laser Printer
(REP
14.4).
(Figure
1).
6.
Removing the Left Cover Assembly
a.
Remove the Retaining Clip off the link mounting post.
b.
While supporting the Left Cover Assembly, lift up the Stop Arm.
c.
Lower the Left Cover Assembly and lift the Cover Assembly off the pivot pins to
remove.
Figure 2 Removing Left Cover Assembly
January 2010
4-31
(Figure
2).
Repairs and Adjustments
REP 8.1