Configuring To Output System Information To The Trap Buffer - H3C S5500-SI Series Operation Manual

Operation Manual – Information Center
H3C S5500-SI Series Ethernet Switches
Enter system view
Enable information center
Name the channel with a
specified channel number
Specify a log host and
configure the parameters
when system information
is output to the log host
Configure
interface through which
log information can be
output to a log host
Configure the source of
the output information
Configure the format of
the time stamp for log
information

1.2.4 Configuring to Output System Information to the Trap Buffer

Follow these steps to configure to output system information to the trap buffer:
Enter system view
Enable information center
To do...
system-view
info-center enable
info-center
channel-number
channel-name
info-center
host-ip
{
channel-name } ] [ facility
local-number ] [ language
{ chinese | english } ]*
the source
info-center
source
interface-number
info-center
{ modu-name | default }
channel
{
channel-name } [ debug
{ level severity | state
state }* | log { level
severity | state state }* |
trap { level severity |
state state }* ]*
info-center
loghost
no-year-date | none }
To do...
system-view
info-center enable
Chapter 1 Information Center Configuration
Use the command...
channel
name
loghost
[ channel
channel-number
loghost
interface-type
source
channel-number
timestamp
{ date
Use the command...
1-8
Remarks
—
Optional
Enabled by default
Optional
Refer to Table 1-3 for
default channel names
Required
|
Disabled by default with
channel 2 as the default
channel when enabled
Optional
By default, no source
interface is configured,
the system selects an
interface as the source
interface
|
Required
Optional
By default, the time stamp
|
for log, information is
date.
Remarks
—
Optional
Enabled by default