Setting To Output System Information To The Trap Buffer - H3C S5500-EI series Operation Manual

Operation Manual – Information Center
H3C S5500-EI Series Ethernet Switches
Configure the source
interface through which
log information can be
output to a log host
Configure the output rules
of the system information
Configure the format of
the time stamp for log
information

1.2.5 Setting to Output System Information to the Trap Buffer

Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output
to the trap buffer and
specify the buffer size
To do...
info-center loghost
source interface-type
interface-number
info-center source
{ module-name | default }
channel
{ channel-number |
channel-name } [ debug
{ level severity | state
state } * | log { level
severity | state state } * |
trap { level severity |
state state } * ] *
info-center timestamp
loghost { date |
no-year-date | none }
To do...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center trapbuffer
[ channel
{ channel-number |
channel-name } | size
buffersize ] *
Chapter 1 Information Center Configuration
Use the command...
Use the command...
1-11
Remarks
Optional
No source interface is
configured by default, and
the system selects an
interface as the source
interface.
Optional
Refer to Table 1-4 for the
output rules of the system
information.
Optional
date by default.
Remarks
—
Optional
Enabled by default
Optional
Refer to Table 1-2 for
default channel names.
Optional
System information is
output to the trap buffer by
default with a default
channel of channel 3
(known as trapbuffer) and
a default buffer size of
256.