Setting To Output System Information To The Trap Buffer; Setting To Output System Information To The Log Buffer - H3C S3100 Series Operation Manual

Setting to Output System Information to the Trap Buffer

Table 1-13 Set to output system information to the trap buffer
Operation
Enter system view
Enable the information center
Enable system information output
to the trap buffer
Configure the output rules of
system information
Set the format of time stamp in the
output information

Setting to Output System Information to the Log Buffer

Table 1-14 Set to output system information to the log buffer
Operation
Enter system view
Enable the information center
Enable information output to the
log buffer
Configure the output rules of
system information
Set the format of time stamp in the
output information
Command
system-view
info-center enable
info-center trapbuffer [channel
{ channel-number | channel-name }
| size buffersize]*
info-center source { modu-name |
default } channel
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity | state state } ]*
info-center timestamp { log | trap
| debugging } { boot | date |
none }
Command
system-view
info-center enable
info-center logbuffer [ channel
{ channel-number | channel-name }
| size buffersize ]*
info-center source { modu-name |
default } channel
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity | state state } ]*
info-center timestamp { log | trap
| debugging } { boot | date |
none }
1-12
Description
—
Optional
Enabled by default.
Optional
By default, the switch uses
information channel 3 to output
trap information to the trap buffer,
which can holds up to 256 items by
default.
Optional
Table 1-8 for the default
Refer to
output rules of system information.
Optional
By default, the time stamp format
of the output trap information is
date.
Description
—
Optional
Enabled by default.
Optional
By default, the switch uses
information channel 4 to output log
information to the log buffer, which
can holds up to 512 items by
default.
Optional
Refer to Table 1-8 for the default
output rules of system information.
Optional
By default, the time stamp format
of the output log information is
date.