Show Ip Policy; Show Ip Prefix-List - NETGEAR M6100 Series Reference Manual

no set metric (BGP)
To remove a set command from a route map, use the no set metric command.
Format
no set metric value
Mode Route Map Configuration

show ip policy

This command lists the route map associated with each interface.
Format
show ip policy
Mode Privileged Exec
Term Definition
Interface The interface.
Route-map The route map

show ip prefix-list

This command displays configuration and status for a prefix list.
Format
show ip prefix-list [detail | summary] prefix-list-name [network/length] [seq
sequence-number] [longer] [first-match]
Mode Privileged EXEC
Parameter
detail | summary
prefix-list-name
network/length
seq
sequence-number
longer
first-match
Acceptable forms of this command are as follows:
•
show ip prefix-list prefix-list-name network/length first-match
•
show ip prefix-list prefix-list-name network/length longer
M6100 Series Switches
Description
(Optional) Displays detailed or summarized information about all prefix lists.
(Optional) The name of a specific prefix list.
(Optional) The network number and length (in bits) of the network mask.
(Optional) Applies the sequence number to the prefix list entry.
(Optional) The sequence number of the prefix list entry.
(Optional) Displays all entries of a prefix list that are more specific than the given
network/length.
(Optional) Displays the entry of a prefix list that matches the given network/length.
Routing Commands
671