Router-Id (Ospfv); Timers Pacing Lsa-Group (Ospfv) - NETGEAR M6100 Series Reference Manual

no redistribute
This command configures OSPF protocol to prohibit redistribution of routes from the
specified source protocol/routers.
Format
no redistribute {static | connected} [metric] [metric-type] [tag]
Mode Router OSPFv3 Config
router-id (OSPFv3)
This command sets a 4-digit dotted-decimal number uniquely identifying the router ospf id.
The ipaddress is a configured value.
Format
router-id ipaddress
Mode Router OSPFv3 Config
timers pacing lsa-group
Use this command to adjust how OSPFv3 groups LSAs for periodic refresh. OSPFv3
refreshes self-originated LSAs approximately once every 30 minutes. When OSPFv3
refreshes LSAs, it considers all self-originated LSAs whose age is from 1800 to 1800 plus the
pacing group size. Grouping LSAs for refresh allows OSPFv3 to combine refreshed LSAs
into a minimal number of LS Update packets. Minimizing the number of Update packets
makes LSA distribution more efficient.
When OSPFv3 originates a new or changed LSA, it selects a random refresh delay for the
LSA. When the refresh delay expires, OSPFv3 refreshes the LSA. By selecting a random
refresh delay, OSPFv3 avoids refreshing a large number of LSAs at one time, even if a large
number of LSAs are originated at one time.
seconds is the width of the window in which LSAs are refreshed. For the seconds argument,
the range for the pacing group window is from 10 to 1800 seconds.
Default 60 seconds
Format
timers pacing lsa-group seconds
Mode Router OSPFv3 Config
no timers pacing lsa-group
This command returns the LSA Group Pacing parameter to the factory default value of 60
seconds.
Format
no timers pacing lsa-group
Mode Router OSPFv3 Config
M6100 Series Switches
(OSPFv3)
IPv6 Commands
941