Show Lldp Med; Lldp Med Transmit-Tlv All - NETGEAR M6100 Series Reference Manual

no lldp med faststartrepeatcount
Use this command to return to the factory default value.
Format
no lldp med faststartrepeatcount
Mode Global Config

lldp med transmit-tlv all

Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED
set will be transmitted in the Link Layer Discovery Protocol Data Units (LLDPDUs).
Default By default, the capabilities and network policy TLVs are included.
Format
lldp med transmit-tlv all [capabilities] [ex-pd] [ex-pse] [inventory]
[location] [network-policy]
Mode Global Config
Term Definition
capabilities Transmit the LLDP capabilities TLV.
ex-pd Transmit the LLDP extended PD TLV.
ex-pse Transmit the LLDP extended PSE TLV.
inventory Transmit the LLDP inventory TLV.
location Transmit the LLDP location TLV.
network-policy Transmit the LLDP network policy TLV.
no lldp med transmit-tlv
Use this command to remove a TLV.
Format
no lldp med transmit-tlv [capabilities] [network-policy] [ex-pse] [ex-pd]
[location] [inventory]
Mode Global Config

show lldp med

Use this command to display a summary of the current LLDP MED configuration.
Format
show lldp med
Mode Privileged Exec
M6100 Series Switches
Switching Commands
553