NETGEAR M6100 Series Reference Manual page 1158

Table 27. TACACS+ Log Messages (continued)
Component Message
TACACS+ TACACS+: no key configured to encrypt packet
for server x.x.x.x
TACACS+ TACACS+: received invalid packet type from
server.
TACACS+ TACACS+: invalid major version in received
packet.
TACACS+ TACACS+: invalid minor version in received
packet.
Table 28. LLDP Log Message
Component Message
LLDP lldpTask(): invalid message type:xx. xxxxxx:xx
Table 29. SNTP Log Message
Component Message
SNTP SNTP: system clock synchronized on %s UTC
Table 30. DHCPv6 Client Log Messages
Component Message
DHCP6 Client ip6Map dhcp add failed.
DHCP6 Client osapiNetAddrV6Add failed on interface xxx.
DHCP6 Client Failed to add DNS Server xxx to DNS Client.
DHCP6 Client Failed to add Domain name xxx to DNS Client.
M6100 Series Switches
NETGEAR Managed Switch Software Log Messages
1158
Cause
No key configured for the specified server.
Received packet type that is not supported.
Major version mismatch.
Minor version mismatch.
Cause
Unsupported LLDP packet received.
Cause
Indicates that SNTP has successfully
synchronized the time of the switch with the
server.
Cause
This message appears when the update of a
DHCP leased IP address to IP6Map fails.
This message appears when the update of a
DHCP leased IP address fails.
This message appears when the update of a
DNS6 Server address given by the DHCPv6
Server to the DNS6 Client fails.
This message appears when the update of a
DNS6 Domain name info given by the DHCPv6
Server to the DNS6 Client fails.