Spanning-Tree Bpdufilter - NETGEAR M6100 Series Reference Manual

A bridge that receives an RLQ and has connectivity to the root forwards the query toward the
root through its root port.
A bridge that receives a RLQ request and does not have connectivity to the root (switch
bridge ID is different from the root bridge ID in the query) or is the root bridge immediately
answers the query with its root bridge ID.
RLQ responses are flooded on designated ports.
Default NA
Format
spanning-tree backbonefast
Mode Global Config
no spanning-tree backbonefast
This command disables backbonefast.
Note: PVRSTP embeds support for FastBackbone and FastUplink. Even if
FastUplink and FastBackbone are configured, they are effective only
in PVSTP mode.
Format
no spanning-tree backbonefast
Mode Global Config

spanning-tree bpdufilter

Use this command to enable BPDU Filter on an interface or range of interfaces.
Default disabled
Format
spanning-tree bpdufilter
Mode Interface Config
no spanning-tree bpdufilter
Use this command to disable BPDU Filter on the interface or range of interfaces.
Default disabled
Format
no spanning-tree bpdufilter
Mode Interface Config
M6100 Series Switches
Switching Commands
333