Show Ipv6 Mld Interface - NETGEAR M6100 Series Reference Manual

Command example:
(NETGEAR Routing) #show ipv6 mld groups ?
group-address
<unit/slot/port>
Command example:
(NETGEAR Routing) #show ipv6 mld groups 1/0/1
Group Address.................................. FF43::3
Interface...................................... 1/0/1
Up Time (hh:mm:ss)............................. 00:03:04
Expiry Time (hh:mm:ss)......................... ------
Command example:
(NETGEAR Routing) #show ipv6 mld groups ff43::3
Interface...................................... 1/0/1
Group Address.................................. FF43::3
Last Reporter.................................. FE80::200:FF:FE00:3
Up Time (hh:mm:ss)............................. 00:02:53
Expiry Time (hh:mm:ss)......................... ------
Filter Mode.................................... Include
Version1 Host Timer............................ ------
Group compat mode.............................. v2
Source Address ExpiryTime
----------------- -----------
2003::10 00:04:17
2003::20 00:04:17

show ipv6 mld interface

Use this command to display MLD-related information for the interface.
The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter
is a number in the range of 1–4093.
Format
show ipv6 mld interface {unit/slot/port | vlan vland-id}
Mode Privileged EXEC
User EXEC
M6100 Series Switches
Enter Group Address Info.
Enter interface in unit/slot/port format.
IPv6 Multicast Commands
1133