NETGEAR M6100 Series Reference Manual page 738

Term Definition
NSF Restart Status The current graceful restart status of the router.
• Not Restarting
• Planned Restart
• Unplanned Restart
NSF Restart Age Number of seconds until the graceful restart grace period expires.
NSF Restart Exit Indicates why the router last exited the last restart:
Reason
• None — Graceful restart has not been attempted.
• In Progress — Restart is in progress.
• Completed — The previous graceful restart completed successfully.
• Timed Out — The previous graceful restart timed out.
• Topology Changed — The previous graceful restart terminated prematurely because of a
topology change.
NSF Help Support Indicates whether helpful neighbor functionality has been enabled for OSPF for planned restarts,
unplanned restarts, or both (Always).
NSF help Strict Indicates whether strict LSA checking has been enabled. If enabled, then an OSPF helpful neighbor
LSA checking will exit helper mode whenever a topology change occurs. If disabled, an OSPF neighbor will
continue as a helpful neighbor in spite of topology changes.
Prefix-suppression Displays whether prefix-suppression is enabled or disabled.
Command example:
(alpha3) #show ip ospf
Router ID...................................... 3.3.3.3
OSPF Admin Mode................................ Enable
RFC 1583 Compatibility......................... Enable
External LSDB Limit............................ No Limit
Exit Overflow Interval......................... 0
Spf Delay Time................................. 5
Spf Hold Time.................................. 10
Flood Pacing Interval.......................... 33 ms
LSA Refresh Group Pacing Time.................. 60 sec
Opaque Capability.............................. Enable
AutoCost Ref BW................................ 100 Mbps
Default Passive Setting........................ Disabled
Maximum Paths.................................. 4
Default Metric................................. Not configured
Stub Router Configuration...................... <val>
Stub Router Startup Time....................... <val> seconds
Summary LSA Metric Override.................... Enabled (<met>)
Default Route Advertise........................ Disabled
Always......................................... FALSE
Metric......................................... Not configured
M6100 Series Switches
Routing Commands
738