Show Ip As-Path-Access-List; Show Ip Community-List - NETGEAR M6100 Series Reference Manual

show ip as-path-access-list

This command displays the contents of AS path access lists.
Format
show ip as-path-access-list [as-path-list-number]
Mode Privileged EXEC
Parameter Description
as-path-list-number (Optional) When an AS path list number is specified, the output is limited to the single AS path list
specified. The number is an integer from 1 to 500.
Command example:
(NETGEAR Switch)# show ip as-path-access-list
AS path access list 1
deny _100_
deny ^100$
AS path access list 2
deny _200_
deny ^200$

show ip community-list

This command displays community lists. The format of community values is dictated by the
command ip bgp-community new-format
Format
show ip community-list [community-list-name]
Mode Privileged EXEC
Parameter
community-list-name
Command example:
(NETGEAR Switch) #show ip community-list
Standard community list buzz
permit 100:200
permit 100:300
permit 100:400
Standard community list woody
permit 200:1
permit 200:2
permit 200:3
M6100 Series Switches
on page 878.
Description
(Optional) A standard community list name. This option limits the output to a single list.
Border Gateway Protocol Commands
880