no dot1x unauthenticated-vlan
This command resets the unauthenticated-vlan associated with the port to its default value.
Format
no dot1x unauthenticated-vlan
Mode
Interface Config
dot1x user
This command adds the specified user to the list of users with access to the specified port or
all ports. The user argument must be a configured user.
Format
dot1x user user {unit/slot/port | all}
Mode
Global Config
no dot1x user
This command removes the user from the list of users with access to the specified port or all
ports.
Format
no dot1x user user {unit/slot/port | all}
Mode
Global Config
authentication enable
This command globally enables the Authentication Manager. Interface configuration takes
effect only if the Authentication Manager is enabled with this command.
Default
disabled
Format
authentication enable
Mode
Global Config
no authentication enable
This command disables the Authentication Manager.
Format
no authentication enable
Mode
Global Config
authentication order
This command sets the order of authentication methods used on a port. The available
authentication methods are Dot1x, MAB, and captive portal. Ordering sets the order of
methods that the switch attempts when trying to authenticate a new device connected to a
port. If one method is unsuccessful or timed out, the next method is attempted.
M6100 Series Switches
Switching Commands
404