Ip Irdp Multicast; Ip Irdp Preference; Show Ip Irdp - NETGEAR M6100 Series Reference Manual

ip irdp multicast

This command configures the destination IP address for router advertisements as 224.0.0.1,
which is the default address. The no form of the command configures the IP address as
255.255.255.255 to instead send router advertisements to the limited broadcast address.
Format
ip irdp multicast ip address
Mode Interface Config
no ip irdp multicast
By default, router advertisements are sent to 224.0.0.1. To instead send router
advertisements to the limited broadcast address, 255.255.255.255, use the no form of this
command.
Format
no ip irdp multicast
Mode Interface Config

ip irdp preference

This command configures the preferability of the address as a default router address, relative
to other router addresses on the same subnet. The preference number can be a number
from -2147483648 to 2147483647.
Default 0
Format
ip irdp preference number
Mode Interface Config
no ip irdp preference
This command configures the default preferability of the address as a default router address,
relative to other router addresses on the same subnet.
Format
no ip irdp preference
Mode Interface Config

show ip irdp

This command displays the router discovery information for all interfaces, a specified
interface, or specified VLAN. The argument unit/slot/port corresponds to a physical
routing interface or VLAN routing interface. The vlan keyword and vland-id argument are
M6100 Series Switches
Routing Commands
678