NETGEAR M6100 Series Reference Manual page 1166

Table 46. 802.3ad Log Messages
Component Message
802.3ad dot3adReceiveMachine: received default event
%x
802.3ad dot3adNimEventCompletionCallback,
dot3adNimEventCreateCompletionCallback:
DOT3AD: notification failed for event(%d),
intf(%d), reason(%d)
Table 47. FDB Log Message
Component Message
FDB fdbSetAddressAgingTimeOut: Failure setting fid
%d address aging timeout to %d
Table 48. Double VLAN Tag Log Message
Component Message
Double Vlan Tag dvlantagIntfIsConfigurable: Error accessing
dvlantag config data for interface %d
Table 49. IPv6 Provisioning Log Message
Component Message
IPV6 Provisioning ipv6ProvIntfIsConfigurable: Error accessing IPv6
Provisioning config data for interface %d
Table 50. MFDB Log Message
Component Message
MFDB mfdbTreeEntryUpdate: entry does not exist
M6100 Series Switches
NETGEAR Managed Switch Software Log Messages
1166
Cause
Received a LAG PDU and the RX state machine
is ignoring this LAGPDU.
The event sent to NIM was not completed
successfully.
Cause
Unable to set the age time in the hardware.
Cause
A default configuration does not exist for this
interface. Typically a case when a new interface
is created and has no preconfiguration.
Cause
A default configuration does not exist for this
interface. Typically a case when a new interface
is created and has no preconfiguration.
Cause
Trying to update a non existing entry.