NETGEAR M6100 Series Reference Manual page 1043

Default none
Format
ip access-group {accesslistnumber | name} {{control-plane| in | out} | vlan
vlan-id {in | out}} [sequence 1-4294967295]
Modes Interface Config
Global Config
Parameter Description
accesslistnumber Identifies a specific IP ACL. The range is 1 to 199.
name The name of the Access Control List.
vlan-id A VLAN ID associated with a specific IP ACL in a given direction.
sequence A optional sequence number that indicates the order of this IP access list relative to the other IP
access lists already assigned to this interface and direction. The range is 1 to 4294967295.
Command example:
(NETGEAR Switch) (Config)#ip access-group ip1 control-plane
no ip access-group
This command removes a specified IP ACL from an interface.
Default none
Format
no ip access-group {accesslistnumber | name} {{control-plane | in | out}|
vlan vlan-id {in | out}}
Mode Interface Config
Global Config
Command example:
(NETGEAR Switch)(Config)#no ip access-group ip1 control-plane
acl-trapflags
This command enables the ACL trap mode.
Default disabled
Format
acl-trapflags
Mode Global Config
M6100 Series Switches
Quality of Service Commands
1043