Show Ip Dvmrp Neighbor - NETGEAR M6100 Series Reference Manual

The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter
is a number in the range of 1–4093.
Format
show ip dvmrp interface {unit/slot/port | vlan vland-id}
Modes Privileged EXEC
User EXEC
Term Definition
Interface Mode Indicates whether DVMRP is enabled or disabled on the specified interface.
Metric The metric of this interface. This is a configured value.
Local Address The IP address of the interface.
The following field is displayed only when DVMRP is operational on the interface.
Term Definition
Generation ID The Generation ID value for the interface. This is used by the neighboring routers to detect that the
DVMRP table should be resent.
The following fields are displayed only if DVMRP is enabled on this interface.
Term Definition
Received Bad The number of invalid packets received.
Packets
Received Bad The number of invalid routes received.
Routes
Sent Routes The number of routes that have been sent on this interface.

show ip dvmrp neighbor

This command displays the neighbor information for DVMRP.
Format
show ip dvmrp neighbor
Modes Privileged EXEC
User EXEC
Term Definition
IfIndex The value of the interface used to reach the neighbor.
Nbr IP Addr The IP address of the DVMRP neighbor for which this entry contains information.
State The state of the neighboring router. The possible value for this field are ACTIVE or DOWN.
M6100 Series Switches
IP Multicast Commands
1079