Show Ip Bgp Aggregate-Address - NETGEAR M6100 Series Reference Manual

AS Path.................................... 20 10
Origin..................................... IGP
Metric..................................... 10
Type....................................... External
IGP Cost................................... 30
Peer (Peer ID)............................. 100.10.1.1 (32.4.1.1)
BGP Next Hop............................... 100.10.1.1
Atomic Aggregate........................... Included
Aggregator (AS, Router ID)................. 300, 14.1.1.1
Communities................................ no-export
Non-best Paths:
Local Preference........................... 200
AS Path.................................... 18 50 27
Origin..................................... Incomplete
Type....................................... External
IGP Cost................................... 10
Peer (Peer ID)............................. 200.1.1.1 (18.24.1.3)
BGP Next Hop............................... 200.1.1.1

show ip bgp aggregate-address

This command lists aggregate addresses that have been configured and indicates whether
each is currently active.
Format
show ip bgp aggregate-address
Mode Privileged EXEC
Parameter Description
Prefix/Len Destination prefix and prefix length
AS Set Indicates whether an empty AS path is advertised with the aggregate address (N) or an AS SET is
advertised with the set of AS numbers for the paths contributing to the aggregate (Y)
Summary Only Indicates whether the individual networks are suppressed (Y) or advertised (N).
Active Indicates whether the aggregate is currently being advertised.
Command example:
(R1) # show ip bgp aggregate-address
Prefix/Len AS Set
10.0.0.0/8 N
20.0.0.0/8 N
M6100 Series Switches
Summary Only Active
Y
Y
Border Gateway Protocol Commands
853
Y
N