NETGEAR M6100 Series Reference Manual page 203

Upload and download files from a server using FTP, TFTP, Xmodem, Ymodem, or Zmodem.
SFTP and SCP are available as additional transfer methods if the software package supports
secure management. If FTP is used, a password is required.
Format
copy source destination {verify | noverify}
Mode Privileged EXEC
Replace the source and destination parameters with the options in
page 204. For the url source or destination, use one of the following values:
{xmodem | tftp://ipaddr|hostname | ip6address | hostname/filepath/filename [noval]|
sftp|scp://username@ipaddr | ipv6address/filepath/filename | ftp://user@ipaddress |
hostname/filepath/filename}
verify and noverify are only available if the image/configuration verify options feature is
enabled (see file verify
be performed for the specified downloaded image or configuration file. noverify specifies
that no verification will be performed.
The keyword ias-users supports the downloading of the IAS user database file. When the
IAS users file is downloaded, the switch IAS user's database is replaced with the users and
its attributes available in the downloaded file. In the command copy url ias-users, for
url one of the following is used for IAS users file:
{{ tftp://<ipaddr | hostname> | <ipv6address | hostname> /<filepath>/<filename> } |
{sftp | scp://<username>@<ipaddress>/<filepath>/<filename>}}
Note: The maximum length for the file path is 160 characters, and the
maximum length for the file name is 31 characters.
For FTP, TFTP, SFTP and SCP, the ipaddr or hostname parameter is the IP address or
host name of the server, filepath is the path to the file, and filename is the name of the
file you want to upload or download. For SFTP and SCP, the username parameter is the
user name for logging into the remote server via SSH.
Note: ip6address is also a valid parameter for routing packages that
support IPv6.
To copy OpenFlow SSL certificates to the switch using TFTP or XMODEM, using only the
following options pertinent to the OpenFlow SSL certificates.
Format
copy [mode/file] nvram:{openflow-ssl-ca-cert | openflow-ssl-cert |
openflow-ssl-priv-key}
Mode Privileged Exec
M6100 Series Switches
on page 206); verify specifies that digital signature verification will
Utility Commands
203
Table 9 on