Show Ip Vrrp Interface - NETGEAR M6100 Series Reference Manual

Term Definition
Authentication The total number of VRRP advertisements received for which the authentication type is not equal to
Type Mismatch the locally configured type for this virtual router.
Packet Length The total number of VRRP packets received with packet length less than length of VRRP header.
Errors
show ip vrrp
This command displays whether VRRP functionality is enabled or disabled on the switch. It
also displays some global parameters which are required for monitoring. This command
takes no options.
Format
show ip vrrp
Modes Privileged EXEC
User EXEC
Term Definition
VRRP Admin Mode The administrative mode for VRRP functionality on the switch.
Router Checksum The total number of VRRP packets received with an invalid VRRP checksum value.
Errors
Router Version The total number of VRRP packets received with Unknown or unsupported version number.
Errors
Router VRID Errors The total number of VRRP packets received with invalid VRID for this virtual router.

show ip vrrp interface

This command displays all configuration information and VRRP router statistics of a virtual
router configured on a specific interface. The parameter vrid is the virtual router ID which
has an integer value ranges from 1 to 255.
The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vlan-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in a unit/slot/port format. The vlan-id can
be a number from 1–4093.
Format
show ip vrrp interface {unit/slot/port | vlan vlan-id} vrid
Modes Privileged EXEC
User EXEC
Term Definition
IP Address The configured IP address for the Virtual router.
VMAC address The VMAC address of the specified router.
M6100 Series Switches
Routing Commands
690