NETGEAR M6100 Series Reference Manual page 204

CAUTION:
Before you load a new release image to make a backup, upload the
existing startup-config.cfg file to the server.
Table 9. Copy parameters
Source
nvram:backup-config
nvram:clibanner
nvram:cpupktcapture.pc
ap
nvram:crash-log
nvram:errorlog
nvram:factory-defaults url
nvram:log
nvram:operational-log
nvram:script
scriptname
nvram:startup-config
nvram:startup-config
nvram:startup-log
nvram:traplog
system:running-config
system:running-config
system:image
url
url
url
M6100 Series Switches
Destination
nvram:startup-config Copies the backup configuration to the startup
url
url
url
url
url
url
url
nvram:backup-config
url
url
url
nvram:startup-config Saves the running configuration to NVRAM.
nvram:factory-defaul
ts
url
nvram:clibanner
nvram:publickey-conf
ig
nvram:publickey-imag
e
Utility Commands
204
Description
configuration.
Copies the CLI banner to a server.
Uploads CPU packets capture file.
Copies the crash log to a server.
Copies the error log file to a server.
Uploads factory defaults file.
Copies the log file to a server.
Copies the operational log file to a server.
Copies a specified configuration script file to a
server.
Copies the startup configuration to the backup
configuration.
Copies the startup configuration to a server.
Uploads the startup log file.
Copies the trap log file to a server.
Saves the running configuration to NVRAM to the
factory-defaults file.
Saves the system image to a server.
Downloads the CLI banner to the system.
Downloads the Public Key for Configuration Script
validation.
Downloads Public Key for Image validation.