User Name (Captive Portal Config); User Password (Captive Portal Config); User Password Encrypted - NETGEAR M6100 Series Reference Manual

user name (Captive Portal Config)

This command assigns a name to the User ID. This name is used at the client station for
authentication. The user-id variable is the local user ID created with the user command
and can be from 1 to 128 characters. The username variable is the name of the user and
can have up to 32 alphanumeric characters.
Format
user user-id name username
Mode Captive Portal Config
Command example:
(NETGEAR Switch)(Config-CP) #user 1 name johnsmith

user password (Captive Portal Config)

This command sets or modifies the password for the associated captive portal user. The
user-id variable is the local user ID created with the user command and can be from 1 to
128 characters. The password variable is the user id's password and can have from 8 to 64
alphanumeric characters.
Format
user user-id password password
Mode Captive Portal Config
Command example:
(NETGEAR Switch)(Config-CP) #user 1 password
Enter Password (8 - 64 characters):
Re-enter password:

user password encrypted

This command modifies the password for the associated captive portal user. The command
accepts the password in an encrypted format. This command is used primarily by the show
running config command process.
The user-id variable is the local user ID created with the user command. The
encrypted-pwd variable is the password in encrypted format, which can be up to 128
hexadecimal characters.
Format
user user-id password encrypted encrypted-pwd
Mode Captive Portal Config
Command example:
(NETGEAR Switch)(Config-CP) #user 1 password encrypted 42 65 74 74 65 72 20 73 61 66 65
20 74 68 61 6e 20 73 6f 72 72 79
M6100 Series Switches
Captive Portal Commands
790