Stats Flow-Based (Global Config) - NETGEAR M6100 Series Reference Manual

Parameter Description
time range name Name of the time range for the group or the flow-based rule. The range is 1 to 31 alphanumeric
characters. The default is None.
list of reporting Report the statistics to the configured method. The range is:
methods
• 0. none
• 1. console
• 2. syslog
• 3. e-mail
The default is None.
Command example:
(NETGEAR Switch) (Config)# stats group received timerange test reporting console email
syslog
(NETGEAR Switch) (Config)# stats group received-errors timerange test reporting email
syslog
(NETGEAR Switch) (Config)# stats group received-
none
no stats group
This command deletes the configured group.
Format
no stats group [group-id | name]
Mode Global Config
Command example:
(NETGEAR Switch) (Config)# no stats group received
(NETGEAR Switch) (Config)# no stats group received-errors
(NETGEAR Switch) (Config)# no stats group received-transmitted

stats flow-based (Global Config)

This command configures flow based statistics rules for the given parameters over the
specified time range. Only an IPv4 address is allowed as source and destination IP address
Format
stats flow-based rule-id timerange time-range-name [{srcip ip-address} {dstip
ip-address} {srcmac mac-address} {dstmac mac-address} {srctcpport portid}
{dsttcpport portid} {srcudpport portid} {dstudpport portid}]
Mode Global Config
M6100 Series Switches
transmitted timerange test reporting
Utility Commands
315