show ip bgp community
This command shows BGP IPv4 routes that belong to a specified set of communities.
Format
show ip bgp community communities [exact-match]
Mode
Privileged EXEC
Parameter
Description
communities
A string of zero or more community values, which may be in either format and may contain the
well-known community keywords no-advertise and no-export. The output displays routes that belong
to every community specified in the command.
exact-match
(Optional) Only displays routes that are members of those and only those communities specified in
the command.
show ip bgp community-list
This command displays IPv4 routes that match a community list name. The output format
and field descriptions are the same as for
Format
show ip bgp community-list name [exact-match]
Mode
Privileged EXEC
Parameter
Description
name
A standard community list name.
exact-match
(Optional) Display only routes that are an exact match for the set of communities in the matching
community list statement.
show ip bgp neighbors
This command shows details about BGP neighbor configuration and status. If the neighbor is
configured to inherit configuration parameters from a peer template, the output shows the
inherited values.
Note:
Policy configuration is moved from this command to the command
show ip bgp neighbors policy.
Format
show ip bgp neighbors [neighbor-address]
Mode
Privileged EXEC
M6100 Series Switches
show ip bgp
Border Gateway Protocol Commands
854
on page 850.