Show Iscsi Sessions - NETGEAR M6100 Series Reference Manual

show iscsi sessions

This command displays the iSCSI sessions.
Default If not specified, sessions are displayed in short mode (not detailed).
Format
show iscsi sessions [detailed]
Mode Privileged EXEC
Command example:
(NETGEAR Switch) # show iscsi sessions
Target: iqn.1993-11.com.disk-vendor:diskarrays.sn.45678
-----------------------------------------------------------
Initiator: iqn.1992-04.com.os-vendor.plan9:cdrom.12
ISID: 11
Initiator: iqn.1995-05.com.os-vendor.plan9:cdrom.10
ISID: 222
-----------------------------------------------------------
Target: iqn.103-1.com.storage-vendor:sn.43338.
storage.tape:sys1.xyz
Session 3:
Initiator: iqn.1992-04.com.os-vendor.plan9:cdrom.12
Session 4:
Initiator: iqn.1995-05.com.os-vendor.plan9:cdrom.10
-----------------------------------------------------------
Command example:
(NETGEAR Switch)# show iscsi sessions detailed
Target: iqn.1993-11.com.disk-vendor:diskarrays.sn.45678
-----------------------------------------------------------
Session 1:
Initiator: iqn.1992-04.com.os
vendor.plan9:cdrom.12.storage:sys1.xyz
-----------------------------------------------------------
Time started: 17-Jul-2008 10:04:50
Time for aging out: 10 min
ISID: 11
Initiator Initiator
IP address TCP port
172.16.1.3 49154
172.16.1.4 49155
172.16.1.5 49156
Session 2:
M6100 Series Switches
Target Target
IP address IP port
172.16.1.20 30001
172.16.1.21 30001
172.16.1.22 30001
Quality of Service Commands
1067