NETGEAR M6100 Series Reference Manual page 412

Term Definition
VLAN Assigned The reason the VLAN identified in the VLAN-assigned field has been assigned to the port. Possible
Reason values are RADIUS, Unauthenticated VLAN, Guest VLAN, default, and Not Assigned. When the
VLAN Assigned Reason is Not Assigned, it means that the port has not been assigned to any VLAN
by dot1x. This only valid when the port control mode is not MAC-based.
Reauthentication The timer used by the authenticator state machine on this port to determine when reauthentication of
Period the supplicant takes place. The value is expressed in seconds and will be in the range of 1 and
65535.
Reauthentication Indicates if reauthentication is enabled on this port. Possible values are True and False.
Enabled
Key Transmission Indicates if the key is transmitted to the supplicant for the specified port. Possible values are True or
Enabled False.
EAPOL Flood Indicates whether the EAPOL flood support is enabled on the switch. Possible values are True and
Mode Enabled False.
Control Direction The control direction for the specified port or ports. Possible values are both and in.
Maximum Users The maximum number of clients that can get authenticated on the port in the MAC-based dot1x
authentication mode. This value is used only when the port control mode is not MAC-based.
Unauthenticated Indicates the unauthenticated VLAN configured for this port. This value is valid for the port only when
VLAN ID the port control mode is not MAC-based.
Session Timeout Indicates the time for which the given session is valid. The time period in seconds is returned by the
RADIUS server on authentication of the port. This value is valid for the port only when the port
control mode is not MAC-based.
Session This value indicates the action to be taken once the session timeout expires. Possible values are
Termination Action Default, Radius-Request. If the value is Default, the session is terminated the port goes into
unauthorized state. If the value is Radius-Request, then a reauthentication of the client
authenticated on the port is performed. This value is valid for the port only when the port control
mode is not MAC-based.
Command example:
(NETGEAR Switch) #show dot1x detail 1/0/3
Port........................................... 1/0/1
Protocol Version............................... 1
PAE Capabilities............................... Authenticator
Control Mode................................... auto
Authenticator PAE State........................ Initialize
Backend Authentication State................... Initialize
Quiet Period (secs)............................ 60
Transmit Period (secs)......................... 30
Guest VLAN ID.................................. 0
Guest VLAN Period (secs)....................... 90
Supplicant Timeout (secs)...................... 30
Server Timeout (secs).......................... 30
Maximum Requests............................... 2
M6100 Series Switches
Switching Commands
412