Show Network Ipv6 Neighbors; Show Serviceport Ipv6 Neighbors - NETGEAR M6100 Series Reference Manual

show network ipv6 neighbors

Use this command to display the information about the IPv6 neighbor entries cached on the
network port. The information is updated to show the type of the entry.
Default None
Format
show network ipv6 neighbors
Mode Privileged EXEC
Field Description
IPv6 Address The IPv6 address of the neighbor.
MAC Address The MAC Address of the neighbor.
isRtr Shows if the neighbor is a router. If TRUE, the neighbor is a router; FALSE it is not a router.
Neighbor State The state of the neighbor cache entry. Possible values are: Incomplete, Reachable, Stale, Delay,
Probe, and Unknown
Age The time in seconds that has elapsed since an entry was added to the cache.
Last Updated The time in seconds that has elapsed since an entry was added to the cache.
Type The type of neighbor entry. The type is Static if the entry is manually configured and Dynamic if
dynamically resolved.
Command example:
(NETGEAR Routing) #show network ipv6 neighbors
IPv6 Address
------------------------ ----------------- ----- --------- ------
FE80::5E26:AFF:FEBD:852C 5c:26:0a:bd:85:2c FALSE Reachable 0

show serviceport ipv6 neighbors

Use this command to displays information about the IPv6 neighbor entries cached on the
service port. The information is updated to show the type of the entry.
Default None
Format
show serviceport ipv6 neighbors
Mode Privileged EXEC
Field Description
IPv6 Address The IPv6 address of the neighbor.
MAC Address The MAC Address of the neighbor.
M6100 Series Switches
MAC Address isRtr State
IPv6 Commands
888
Neighbor Age
(Secs) Type
------
Static