NETGEAR M6100 Series Reference Manual page 358

Command example:
The following example shows output using a LAG interface number:
(NETGEAR Routing) >show spanning-tree mst port summary 0 lag 1
MST Instance ID................................ CST
STP
Interface Mode Type
--------- -------- ------- ----------------- ---------- ----------
3/1 Enabled
show spanning-tree mst port summary active
This command displays settings for the ports within the specified multiple spanning tree
instance that are active links.
Format
show spanning-tree mst port summary mstid active
Mode Privileged EXEC
User EXEC
Term Definition
MST Instance ID The ID of the existing MST instance.
Interface The interface.
STP Mode Indicates whether spanning tree is enabled or disabled on the port.
Type Currently not used.
STP State The forwarding state of the port in the specified spanning tree instance.
Port Role The role of the specified port within the spanning tree.
Desc Indicates whether the port is in loop inconsistent state or not. This field is blank if the loop guard
feature is not available.
Command example:
(NETGEAR Routing) >show spanning-tree mst port summary 0 active
STP
Interface Mode Type
--------- -------- ------- ----------------- ---------- ---------
M6100 Series Switches
STP
State
Disabled Disabled
STP
State
Switching Commands
358
Port
Role Desc
Port
Role Desc