Clear (Captive Portal Instance Config) - NETGEAR M6100 Series Reference Manual

no block
This command unblocks all traffic for a captive portal configuration.
Format
no block
Mode Captive Portal Instance

clear (Captive Portal Instance Config)

This command sets the configuration for this instance to the default values.
Format
clear
Mode Captive Portal Instance
user-logout
This command enables the ability for an authenticated user to de-authenticate from the
network. This command is configurable for a captive portal configuration.
Format
user-logout
Mode Captive Portal Instance
no user-logout
This command removes the association between an interface and a captive portal
configuration.
Format
no user-logout
Mode Captive Portal Instance
background-color
Use this command to customize the background color of the Captive Portal authentication
page using a well-known color name or RGB value. For example, red or RGB hex-code, that
is, #FF0000. The range of color-code is 1-32 characters.
Default #BFBFBF
Format
background-color color-code
Mode Captive Portal Instance
foreground-color
Use this command to customize the foreground color of the Captive Portal authentication
page using a well-known color name or RGB value. For example, red or RGB hex-code, that
is, #FF0000. The range of color-code is 1-32 characters.
M6100 Series Switches
Captive Portal Commands
781