stats flow-based reporting
This command configures the reporting mechanism for all the flow-based rules configured on
the system. There is no per flow-based rule reporting mechanism. Setting the reporting
method as none resets all the reporting methods.
Format
stats flow-based reporting list-of-reporting-methods
Mode
Global Config
Command example:
(NETGEAR Switch) (Config)# stats flow-based reporting console email syslog
(NETGEAR Switch) (Config)# stats flow-based reporting email syslog
(NETGEAR Switch) (Config)# stats flow-based reporting none
stats group (Interface Config)
This command applies the group specified on an interface or interface-range.
Format
stats group [group-id | name]
Mode
Interface Config
Parameter
Description
group id
The unique identifier for the group.
name
The name of the group.
Command example:
(NETGEAR Switch) (Interface 1/0/1-1/0/10)# stats group 1
(NETGEAR Switch) (Interface 1/0/1-1/0/10)# stats group 2
no stats group
This command deletes the interface or interface-range from the group specified.
Format
no stats group [group-id | name]
Mode
Interface Config
Command example: .
(NETGEAR Switch) (Interface 1/0/1-1/0/10)# no stats group 1
(NETGEAR Switch) (Interface 1/0/1-1/0/10)# no stats group 2
M6100 Series Switches
Utility Commands
317