Show Rmon Statistics Interfaces - NETGEAR M6100 Series Reference Manual

Command example:
(NETGEAR Switch) #show rmon log 1
Maximum table size: 10
Event Description
------------------------------------------------

show rmon statistics interfaces

This command displays the RMON statistics for the given interfaces.
Format
show rmon statistics interfaces unit/slot/port
Mode Privileged Exec
Term
Port
Dropped
Octets
Packets
Broadcast
Multicast
CRC Align Errors
Collisions
Undersize Pkts
Oversize Pkts
Fragments
Jabbers
64 Octets
65-127 Octets
M6100 Series Switches
Time
Description
unit/slot/port
Total number of dropped events on the interface.
Total number of octets received on the interface.
Total number of packets received (including error packets) on the interface.
Total number of good broadcast packets received on the interface.
Total number of good multicast packets received on the interface.
Total number of packets received have a length (excluding framing bits, including FCS
octets) of between 64 and 1518 octets inclusive.
Total number of collisions on the interface.
Total number of undersize packets. Packets are less than 64 octets long (excluding
framing bits, including FCS octets).
Total number of oversize packets. Packets are longer than 1518 octets (excluding
framing bits, including FCS octets).
Total number of fragment packets. Packets are not an integral number of octets in
length or had a bad Frame Check Sequence (FCS), and are less than 64 octets in
length (excluding framing bits, including FCS octets).
Total number of jabber packets. Packets are longer than 1518 octets (excluding
framing bits, including FCS octets), and are not an integral number of octets in length
or had a bad Frame Check Sequence (FCS).
Total number of packets which are 64 octets in length (excluding framing bits, including
FCS octets).
Total number of packets which are between 65 and 127 octets in length (excluding
framing bits, including FCS octets).
Utility Commands
310