stats flow-based (Interface Config)
This command applies the flow-based rule specified by the ID on an interface or
interface-range.
Format
stats flow-based rule-id
Mode
Interface Config
Parameter
Description
rule-id
The unique identifier for the flow-based rule.
Command example:
(NETGEAR Switch) (Interface 1/0/1-1/0/10)# stats flow-based 1
(NETGEAR Switch) (Interface 1/0/1-1/0/10)# stats flow-based 2
no stats flow-based
This command deletes the interface or interface-range from the flow-based rule specified.
Format
no stats flow-based rule-id
Mode
Interface Config
Command example:
(NETGEAR Switch) (Interface 1/0/1-1/0/10)# no stats flow-based 1
(NETGEAR Switch) (Interface 1/0/1-1/0/10)# no stats flow-based 2
show stats group
This command displays the configured time range and the interface list for the group
specified and shows collected statistics for the specified time-range name on the interface list
after the time-range expiry.
Format
show stats group [group-id | name]
Mode
Privileged EXEC
Parameter
Description
group id
The unique identifier for the group.
name
The name of the group.
M6100 Series Switches
Utility Commands
318