File Verify - NETGEAR M6100 Series Reference Manual

Table 9. Copy parameters (continued)
Source
{active | backup}
{active | backup}
Command example:
The following example shows an ias users file that is downloaded and applied.
(NETGEAR Switch) #copy tftp://10.131.17.104/aaa_users.txt ias-users
Mode........................................... TFTP
Set Server IP.................................. 10.131.17.104
Path........................................... ./
Filename....................................... aaa_users.txt
Data Type...................................... IAS Users
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
File transfer operation completed successfully.
Validating and updating the users to the IAS users database.
Updated IAS users database successfully.

file verify

This command enables digital signature verification while an image and/or configuration file
is downloaded to the switch.
Format
file verify {all | image | none | script}
Mode Global Config
Parameter Description
All Verifies the digital signature of both image and configuration files.
Image Verifies the digital signature of image files only.
None Disables digital signature verification for both images and configuration files.
Script Verifies the digital signature of configuration files.
M6100 Series Switches
Destination
unit://unit/{active
| backup}
unit://*/{active |
backup}
Utility Commands
206
Description
Copy an image from the management blade to a
given blade in a chassis. Use the unit parameter to
specify the blade to which the image should be
copied.
Copy an image from the management blade to all
blades in a chassis.