Show Ipv6 Brief - NETGEAR M6100 Series Reference Manual

Default burst-interval of 1000 msec.
burst-size of 100 messages
Format
ipv6 icmp error-interval burst-interval [burst-size]
Mode Global Config
no ipv6 icmp error-interval
Use the no ipv6 icmp error-interval command to return the burst-interval and
burst-size to their default values.
Format
no ipv6 icmp error-interval
Mode Global Config

show ipv6 brief

Use this command to display the IPv6 status of forwarding mode and IPv6 unicast routing
mode.
Format
show ipv6 brief
Mode Privileged EXEC
Term Definition
IPv6 Forwarding Shows whether the IPv6 forwarding mode is enabled.
Mode
IPv6 Unicast Shows whether the IPv6 unicast routing mode is enabled.
Routing Mode
IPv6 Hop Limit Shows the unicast hop count used in IPv6 packets originated by the node. For more information, see
ipv6 hop-limit
ICMPv6 Rate Limit Shows how often the token bucket is initialized with burst-size tokens. For more information, see
Error Interval ipv6 icmp error-interval
ICMPv6 Rate Limit Shows the number of ICMPv6 error messages that can be sent during one burst-interval. For more
Burst Size information, see
Maximum Routes Shows the maximum IPv6 route table size.
IPv6 Unresolved Shows the rate in packets-per-second for the number of IPv6 data packets trapped to CPU when the
Data Rate Limit packet fails to be forwarded in the hardware due to unresolved hardware address of the destined
IPv6 node.
IPv6 Neighbors Shows the dynamic renewal mode for the periodic NUD (neighbor unreachability detection) run on
Dynamic Renew the existing IPv6 neighbor entries based on the activity of the entries in the hardware.
M6100 Series Switches
on page 894.
on page 907.
ipv6 icmp error-interval on page 907.
IPv6 Commands
908