Show Ipv6 Ospf Abr; Show Ipv6 Ospf Area - NETGEAR M6100 Series Reference Manual

show ipv6 ospf abr

This command displays the internal OSPFv3 routes to reach Area Border Routers (ABR).
This command takes no options.
Format
show ipv6 ospf abr
Modes Privileged EXEC
User EXEC
Term Definition
Type The type of the route to the destination. It can be either:
• intra — Intra-area route
• inter — Inter-area route
Router ID Router ID of the destination.
Cost Cost of using this route.
Area ID The area ID of the area from which this route is learned.
Next Hop Next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the next hop.

show ipv6 ospf area

This command displays information about the area. The area-id identifies the OSPF area
that is being displayed.
Format
show ipv6 ospf area area-id
Modes Privileged EXEC
User EXEC
Term Definition
AreaID The area id of the requested OSPF area.
External Routing A number representing the external routing capabilities for this area.
Spf Runs The number of times that the intra-area route table has been calculated using this area's link-state
database.
Area Border Router The total number of area border routers reachable within this area.
Count
Area LSA Count Total number of link-state advertisements in this area's link-state database, excluding AS External
LSAs.
Area LSA A number representing the Area LSA Checksum for the specified area ID excluding the external (LS
Checksum type 5) link-state advertisements.
M6100 Series Switches
IPv6 Commands
957