Domain-Name Enable - NETGEAR M6100 Series Reference Manual

no domain-name
This command removes the domain name.
Format
no domain-name
Mode DHCP Pool Config

domain-name enable

This command enables the domain name functionality in NETGEAR Managed Switch.
Format
domain-name enable [name name]
Mode Global Config
Command example:
(NETGEAR Switch) (Config)#domain-name enable
(NETGEAR Switch) (Config)#exit
no domain-name enable
This command disables the domain name functionality in NETGEAR Managed Switch.
Format
no domain-name enable
Mode Global Config
netbios-name-server
This command configures NetBIOS Windows Internet Naming Service (WINS) name servers
that are available to DHCP clients.
One IP address is required, although one can specify up to eight addresses in one command
line. Servers are listed in order of preference (address1 is the most preferred server,
address2 is the next most preferred server, and so on).
Default none
Format
netbios-name-server address [address2...address8]
Mode DHCP Pool Config
no netbios-name-server
This command removes the NetBIOS name server list.
Format
no netbios-name-server
Mode DHCP Pool Config
M6100 Series Switches
Utility Commands
222