Show Ip Mcast Interface; Show Ip Mcast Boundary - NETGEAR M6100 Series Reference Manual

show ip mcast
This command displays the system-wide multicast information.
Format
show ip mcast
Modes Privileged EXEC
User EXEC
Term Definition
Admin Mode The administrative status of multicast. Possible values are enabled or disabled.
Protocol State The current state of the multicast protocol. Possible values are Operational or Non-Operational.
Table Max Size The maximum number of entries allowed in the multicast table.
Protocol The multicast protocol running on the router. Possible values are PIMDM, PIMSM, or DVMRP.
Multicast The number of entries in the multicast forwarding cache.
Forwarding Cache
Entry Count

show ip mcast boundary

This command displays all the configured administrative scoped multicast boundaries.
The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter
is a number in the range of 1–4093.
Format
show ip mcast boundary {unit/slot/port | vlan vlan-id | all}
Modes Privileged EXEC
User EXEC
Term Definition
Interface
unit/slot/port
Group Ip The group IP address.
Mask The group IP mask.

show ip mcast interface

This command displays the multicast information for the specified interface.
The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter
is a number in the range of 1–4093.
M6100 Series Switches
IP Multicast Commands
1072