Default
100 Mbps
Format
auto-cost reference-bandwidth mbps
Mode
Router OSPFv3 Config
no auto-cost reference-bandwidth (OSPFv3)
Use this command to set the reference bandwidth to the default value.
Format
no auto-cost reference-bandwidth
Mode
Router OSPFv3 Config
clear ipv6 ospf
Use this command to disable and re-enable OSPF.
Format
clear ipv6 ospf
Mode
Privileged EXEC
clear ipv6 ospf configuration
Use this command to reset the OSPF configuration to factory defaults.
Format
clear ipv6 ospf configuration
Mode
Privileged EXEC
clear ipv6 ospf counters
Use this command to reset global and interface statistics.
Format
clear ipv6 ospf counters
Mode
Privileged EXEC
clear ipv6 ospf neighbor
Use this command to drop the adjacency with all OSPF neighbors. On each neighbor's
interface, send a one-way hello. Adjacencies may then be re-established. To drop all
adjacencies with a specific router ID, specify the neighbor's Router ID using the optional
parameter neighbor-id.
Format
clear ipv6 ospf neighbor [neighbor-id]
Mode
Privileged EXEC
M6100 Series Switches
IPv6 Commands
935