Match Ethertype; Class-Map Rename; Match Any - NETGEAR M6100 Series Reference Manual

Format
no class-map class-map-name
Mode Global Config

class-map rename

This command changes the name of a DiffServ class. The class-map-name parameter is
the name of an existing DiffServ class. The new-class-map-name parameter is a
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the class.
Default none
Format
class-map rename class-map-name new-class-map-name
Mode Global Config

match ethertype

This command adds to the specified class definition a match condition based on the value of
the ethertype. The ethertype value is specified as a keyword argument that can be one of
the following types: appletalk, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast,
netbios, novell, pppoe, or rarp or as a range argument that represents an EtherType
value in the range of 0x0600-0xFFFF. Use the not option to negate the match condition.
Format
match [not] ethertype {keyword | custom range}
Mode Class-Map Config
Ipv6-Class-Map Config

match any

This command adds to the specified class definition a match condition whereby all packets
are considered to belong to the class. Use the not option to negate the match condition.
Default none
Format
match [not] any
Mode Class-Map Config
Ipv6-Class-Map Config
M6100 Series Switches
Quality of Service Commands
1006