Show Ip Ospf Interface - NETGEAR M6100 Series Reference Manual

show ip ospf interface

This command displays the information for the physical interface or virtual interface tables.
The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vlan-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in a unit/slot/port format. The vlan-id can
be a number from 1–4093.
Format
show ip ospf interface {unit/slot/port | vlan vland-id | loopback
loopback-id}
Mode Privileged EXEC
User EXEC
Term Definition
IP Address The IP address for the specified interface.
Subnet Mask A mask of the network and host portion of the IP address for the OSPF interface.
Secondary IP The secondary IP addresses if any are configured on the interface.
Address(es)
OSPF Admin Mode States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID The OSPF Area ID for the specified interface.
OSPF Network The type of network on this interface that the OSPF is running on.
Type
Router Priority A number representing the OSPF Priority for the specified interface.
Retransmit Interval A number representing the OSPF Retransmit Interval for the specified interface.
Hello Interval A number representing the OSPF Hello Interval for the specified interface.
Dead Interval A number representing the OSPF Dead Interval for the specified interface.
LSA Ack Interval A number representing the OSPF LSA Acknowledgment Interval for the specified interface.
Transmit Delay A number representing the OSPF Transmit Delay Interval for the specified interface.
Authentication The OSPF Authentication Type for the specified interface are: none, simple, and encrypt.
Type
Metric Cost The cost of the OSPF interface.
Passive Status Shows whether the interface is passive or not.
OSPF MTU-ignore Indicates whether to ignore MTU mismatches in database descriptor packets sent from neighboring
routers.
Flood Blocking Indicates whether flood blocking is enabled on the interface.
M6100 Series Switches
Routing Commands
744