Ipv6 Dhcp Snooping Trust; Ipv6 Dhcp Snooping Log-Invalid - NETGEAR M6100 Series Reference Manual

no ipv6 dhcp snooping binding
Use this command to remove the DHCP static entry from the DHCP Snooping database.
Format
no ipv6 dhcp snooping binding mac-address
Mode Global Config

ipv6 dhcp snooping trust

Use this command to configure an interface or range of interfaces as trusted.
Default disabled
Format
ipv6 dhcp snooping trust
Mode Interface Config
no ipv6 dhcp snooping trust
Use this command to configure the port as untrusted.
Format
no ipv6 dhcp snooping trust
Mode Interface Config

ipv6 dhcp snooping log-invalid

Use this command to control the logging DHCP messages filtration by the DHCP Snooping
application. This command can be used to configure a single interface or a range of
interfaces.
Default disabled
Format
ipv6 dhcp snooping log-invalid
Mode Interface Config
no ipv6 dhcp snooping log-invalid
Use this command to disable the logging DHCP messages filtration by the DHCP Snooping
application.
Format
no ipv6 dhcp snooping log-invalid
Mode Interface Config
M6100 Series Switches
IPv6 Commands
985