Show Fip-Snooping Fcf - NETGEAR M6100 Series Reference Manual

Name-ID
ENode-MAC
FCFs Connected
Sessions Established
Sessions Waiting
Session Failed
Max-FCoE-PDU
Time elapsed

show fip-snooping fcf

Use the show fip-snooping fcf command in User EXEC or Privileged EXEC mode to
display information about the interfaces connected to FCFs.
Note: This command can only be entered after FIP snooping is enabled
using the feature fip-snooping command. Otherwise, it does
not appear in the CLI syntax tree.
Format
show fip-snooping fcf [fcf-mac]
Mode User EXEC
Privileged EXEC
The following information is displayed when no FCF mac argument is supplied.
Parameter Description
Interface Interface to which the FCF is connected.
VLAN ID number of the VLAN to which the FCF belongs.
No. of ENodes Total number of ENodes that are connected to the FCF.
FPMA/SPMA Type of the MAC address for ENode as negotiated by the FCF.
FCMAP FCMAP value used by the FCF.
FCF-MAC MAC address of the FCF.
Fabric Name Name of the FCF.
M6100 Series Switches
000000
00:0c:29:65:82:bc
1
3
1
0
2158
0 days, 1 hours, 20 minutes
Data Center Commands
604