Switchport Mode Private-Vlan - NETGEAR M6100 Series Reference Manual

switchport mode private-vlan

This command configures a port as a promiscuous or host private VLAN port. Note that the
properties of each mode can be configured even when the switch is not in that mode.
However, they will only be applicable once the switch is in that particular mode.
Format
switchport mode private-vlan {host | promiscuous}
Mode Interface Config
Parameter Description
host Configures an interface as a private VLAN host port. It can be either isolated or community port
depending on the secondary VLAN it is associated with.
promiscuous Configures an interface as a private VLAN promiscuous port. The promiscuous ports are members
of the primary VLAN.
no switchport mode private-vlan
This command removes the private-VLAN association or mapping from the port.
Format
no switchport mode private-vlan
Mode Interface Config
private-vlan
This command configures the private VLANs and configures the association between the
primary private VLAN and secondary VLANs.
Format
private-vlan {association [add | remove] secondary-vlan-list | community |
isolated | primary}
Mode VLAN Config
Parameter Description
association Associates the primary and secondary VLAN.
secondary-vlan-list A list of secondary VLANs to be mapped to a primary VLAN.
community Designates a VLAN as a community VLAN.
isolated Designates a VLAN as the isolated VLAN.
primary Designates a VLAN as the primary VLAN.
M6100 Series Switches
Switching Commands
380