Show Spanning-Tree Uplinkfast; Show Spanning-Tree Vlan - NETGEAR M6100 Series Reference Manual

Spanning Tree Adminmode........... Enabled
Spanning Tree Version............. IEEE 802.1s
BPDU Guard Mode................... Disabled
BPDU Filter Mode.................. Disabled
Configuration Name................ ****
Configuration Revision Level...... ****
Configuration Digest Key.......... ****
Configuration Format Selector..... 0
No MST instances to display.

show spanning-tree uplinkfast

This command displays spanning tree information for uplinkfast.
Format
show spanning-tree uplinkfast
Mode Privileged EXEC
User EXEC
Term
Uplinkfast transitions (all VLANs)
Proxy multicast addresses transmitted (all
VLANs)
Command example:
(NETGEAR Switch) #show spanning-tree uplinkfast
Uplinkfast is enabled.
BPDU update rate : 150 packets/sec
Uplinkfast Statistics
---------------------
Uplinkfast transitions (all VLANs)................. 0
Proxy multicast addresses transmitted (all VLANs).. 0

show spanning-tree vlan

This command displays spanning tree information per VLAN and also lists out the port roles
and states along with port cost. The vlan-list parameter is a list of VLANs or
VLAN-ranges separated by commas and with no embedded blank spaces. VLAN ranges are
M6100 Series Switches
Definition
The number of uplinkfast transitions on all VLANs.
The number of proxy multicast addresses transmitted on all VLANs.
Switching Commands
360