NETGEAR M6100 Series Reference Manual page 1124

Hide thumbs Also See for M6100 Series:
Table of Contents

Advertisement

If no interface is specified, the command displays the status parameters for all PIM-enabled
interfaces.
Format
show ipv6 pim interface [unit/slot/port | vlan vland-id]
Modes
Privileged EXEC
User EXEC
Term
Definition
Interface
unit/slot/port
Mode
Indicates whether the PIM mode enabled on the interface is dense or sparse.
Hello Interval
The frequency at which PIM hello messages are transmitted on this interface. By default, the value is
30 seconds.
Join Prune Interval The join/prune interval for the PIM router. The interval is in seconds.
DR Priority
The priority of the Designated Router configured on the interface. This field is not applicable if the
interface mode is Dense
BSR Border
Identifies whether this interface is configured as a bootstrap router border interface.
Neighbor Count
The number of PIM neighbors learned on this interface. This is a dynamic value and is shown only
when a PIM interface is operational.
Designated Router The IP address of the elected Designated Router for this interface. This is a dynamic value and will
only be shown when a PIM interface is operational. This field is not applicable if the interface mode
is Dense
Command example:
(NETGEAR) #show ipv6 pim interface
Interface.........................................1/0/1
Mode............................................Sparse
Hello Interval (secs)...........................30
Join Prune Interval (secs)......................60
DR Priority.....................................1
BSR Border......................................Disabled
Neighbor Count..................................1
Designated Router...............................192.168.10.1
Interface.........................................1/0/2
Mode............................................Sparse
Hello Interval (secs)...........................30
Join Prune Interval (secs)......................60
DR Priority.....................................1
BSR Border......................................Disabled
Neighbor Count..................................1
Designated Router...............................192.168.10.1
M6100 Series Switches
IPv6 Multicast Commands
1124

Advertisement

Table of Contents
loading

Table of Contents