Show Ipv6 Interface - NETGEAR M6100 Series Reference Manual

Term Definition
IPv6 NUD Shows the maximum number of unicast Neighbor Solicitations sent during NUD (neighbor
Maximum Unicast unreachabililty detection) before switching to multicast Neighbor Solicitations.
Solicits
IPv6 NUD Shows the maximum number of multicast Neighbor Solicitations sent during NUD (neighbor
Maximum Multicast unreachabililty detection) when in UNREACHABLE state.
Solicits
IPv6 NUD Shows the exponential backoff multiple to be used in the calculation of the next timeout value for
Exponential Neighbor Solicitation transmission during NUD (neighbor unreachabililty detection) following the
Backoff Multiple exponential backoff algorithm.
Command example:
(NETGEAR Switch) #show ipv6 brief
IPv6 Unicast Routing Mode...................... Disable
IPv6 Hop Limit................................. 0
ICMPv6 Rate Limit Error Interval............... 1000 msec
ICMPv6 Rate Limit Burst Size................... 100 messages
Maximum Routes................................. 4096
IPv6 Unresolved Data Rate Limit................ 1024 pps
IPv6 Neighbors Dynamic Renew................... Disable
IPv6 NUD Maximum Unicast Solicits.............. 3
IPv6 NUD Maximum Multicast Solicits............ 3
IPv6 NUD Exponential Backoff Multiple.......... 1

show ipv6 interface

Use this command to show the usability status of IPv6 interfaces and whether ICMPv6
Destination Unreachable messages may be sent.
The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id
parameter is a number in the range of 1–4093.
The loopback keyword with the number variable specifies the loopback interface directly
and is a number in the range 0–7. The tunnel keyword with the number variable specifies
the IPv6 tunnel interface and is a number in the range 0–7.
Format
show ipv6 interface [brief | unit/slot/port | vlan vlan-id | loopback number
| tunnel number]
Mode Privileged EXEC
M6100 Series Switches
IPv6 Commands
909